1000 pieces carton FFP2 respirator mask

FFP2 respirators in a set of 1000.

A medical mask (surgical mask or FFP2 mask) must be worn on local public transport and when shopping or wherever it is difficult to maintain the minimum distance. Such a mouth-nose mask can help to protect others from infection.

General hygiene measures such as thorough hand washing are of course still extremely important. Take responsibility for yourself and others and buy the face mask online at Emmi-Nail now.

Register now as a studio customer and enjoy all the benefits!

✔️ for protection against particles in accordance with standard EN 149:2001+A1:2009, protection class FFP2 NR

✔️ CE certification CE2163

✔️ close-fitting, adapts easily to all face shapes

✔️ suitable for single use

Fit of the mask

Press the nose clip firmly against the nose to ensure a tight fit. Check that the mask fits tightly by carrying out a breath test. To do this, the mask must be sucked noticeably against the face when breathing in.

If air enters the mask around the nose, correct the fit using the nose clip. If the mask is generally too loose, twist the ear straps 180° in the shape of a figure of eight.

The mask should be changed as soon as ...

...the mask is no longer tight, e.g. due to a hole, or if it no longer fits snugly after prolonged use.

...the air resistance increases noticeably, e.g. if the mask is soaked through contamination.

Possible problems

It is unlikely that the leakage requirements will be met if there is facial hair between the sealing line of the mask and the face. The mask provides protection against particles, there is no protection against gaseous substances.

Ensure that the air is of sufficient quality with regard to (gaseous) impurities and oxygen content; do not use in an explosive atmosphere.

If the mask is damaged, please do not use it. If the mask does not fit tightly (see Mask fit), adequate protection cannot be guaranteed. Only put on the mask with clean hands to avoid contamination. The mask does not protect against dolomite dust.

Duration of use

The mask is intended for use for one work shift (approx. 8 hours) under normal conditions. The mask is only suitable for single use.

Putting on and taking off the mask

• open the mask with the nose clip at the top and place it over your mouth and nose.
• The edge must be in contact with the nose clip on the bridge of the nose. Align the mask and press the nose clip against the bridge of your nose.
• Place the ear straps over the ears on both sides.
• Check that the mask is tight.
• To remove the mask, pull the ear straps forward over your ears. The outside of the mask may be contaminated with aerosol. Avoid contact.

By additionally wearing a Face protection you can minimize the risk of infection for yourself and others.

Don't forget to order disinfectant at the same time:

Skin, hand and surface disinfectant 2000L

Unsealed hygiene products cannot be exchanged.